Basket
{{item.CourseTitle}}
Price: {{item.ItemPriceExVatFormatted}} {{item.Currency}}
Aron Mesterbasic
The Implementing Cisco Enterprise Advanced Routing and Services (ENARSI) gives you the knowledge you need to install, configure, operate, and troubleshoot an enterprise network.
Your course package is designed to provide maximum learning and convenience. This is included in the price of your course:
Your expert instructor will get you ready for the following exam and certification, which are not included in your course package:
Before taking this course, you should have:
- General understanding of network fundamentals
- Basic knowledge of how to implement LANs
- General understanding of how to manage network devices
- General understanding of how to secure network devices
- Basic knowledge of network automation
These Cisco courses are recommended to help you meet these prerequisites:
- Implementing and Operating Cisco Enterprise Network Core Technologies (ENCOR) v1.0
- Implementing and Administering Cisco Solutions (CCNA) (200-301)
Using our engaging learning methodology including a variety of tools, we’ll cover the entire curriculum.
Objectives
After taking this course, you should be able to:
- Configure classic Enhanced Interior Gateway Routing Protocol (EIGRP) and named EIGRP for IPv4 and IPv6
- Optimize classic EIGRP and named EIGRP for IPv4 and IPv6
- Troubleshoot classic EIGRP and named EIGRP for IPv4 and IPv6
- Configure Open Shortest Path First (OSPF)v2 and OSPFv3 in IPv4 and IPv6 environments
- Optimize OSPFv2 and OSPFv3 behavior
- Troubleshoot OSPFv2 for IPv4 and OSPFv3 for IPv4 and IPv6
- Implement route redistribution using filtering mechanisms
- Troubleshoot redistribution
- Implement path control using Policy-Based Routing (PBR) and IP service level agreement (SLA)
- Configure Multiprotocol-Border Gateway Protocol (MP-BGP) in IPv4 and IPv6 environments
- Optimize MP-BGP in IPv4 and IPv6 environments
- Troubleshoot MP-BGP for IPv4 and IPv6
- Describe the features of Multiprotocol Label Switching (MPLS)
- Describe the major architectural components of an MPLS VPN
- Identify the routing and packet forwarding functionalities for MPLS VPNs
- Explain how packets are forwarded in an MPLS VPN environment
- Implement Cisco Internetwork Operating System (IOS®) Dynamic Multipoint VPNs (DMVPNs)
- Implement Dynamic Host Configuration Protocol (DHCP)
- Describe the tools available to secure the IPV6 first hop
- Troubleshoot Cisco router security features
- Troubleshoot infrastructure security and services
Outline
- Implementing EIGRP
- Optimizing EIGRP
- Troubleshooting EIGRP
- Implementing OSPF
- Optimizing OSPF
- Troubleshooting OSPF
- Implementing Internal Border Gateway Protocol (IBGP)
- Optimizing BGP
- Implementing MP-BGP
- Troubleshooting BGP
- Configuring Redistribution
- Troubleshooting Redistribution
- Implementing Path Control
- Exploring MPLS
- Introducing MPLS L3 VPN Architecture
- Introducing MPLS L3 VPN Routing
- Configuring Virtual Routing and Forwarding (VRF)-Lite
- Implementing DMVPN
- Implementing DHCP
- Troubleshooting DHCP
- Introducing IPv6 First Hop Security
- Securing Cisco Routers
- Troubleshooting Infrastructure Security and Services
Lab Outline
- Configure EIGRP Using Classic Mode and Named Mode for IPv4 and IPv6
- Verify the EIGRP Topology Table
- Configure EIGRP Stub Routing, Summarization, and Default Routing
- Configure EIGRP Load Balancing and Authentication
- LAB: Troubleshoot EIGRP Issues
- Configure OSPFv3 for IPv4 and IPv6
- Verify the Link-State Database
- Configure OSPF Stub Areas and Summarization
- Configure OSPF Authentication
- Troubleshoot OSPF
- Implement Routing Protocol Redistribution
- Manipulate Redistribution
- Manipulate Redistribution Using Route Maps
- Troubleshoot Redistribution Issues
- Implement PBR
- Configure IBGP and External Border Gateway Protocol (EBGP)
- Implement BGP Path Selection
- Configure BGP Advanced Features
- Configure BGP Route Reflectors
- Configure MP-BGP for IPv4 and IPv6
- Troubleshoot BGP Issues
- Implement PBR
- Configure Routing with VRF-Lite
- Implement Cisco IOS DMVPN
- Obtain IPv6 Addresses Dynamically
- Troubleshoot DHCPv4 and DHCPv6 Issues
- Troubleshoot IPv4 and IPv6 Access Control List (ACL) Issues
- Configure and Verify Control Plane Policing
- Configure and Verify Unicast Reverse Path Forwarding (uRPF)
- Troubleshoot Network Management Protocol Issues: Lab 1
- Troubleshoot Network Management Protocol Issues: Lab 2
Das virtuelle Klassenzimmer ist ein Online-Raum, in dem Sie mit Ihrem Dozenten und Ihren Mitschülern in Echtzeit zusammenarbeiten. Alles geschieht live, und Sie können frei interagieren, diskutieren, Fragen stellen und Ihrem Dozenten dabei zusehen, wie er auf einem Whiteboard präsentiert, die Kursunterlagen und Folien bespricht, mit Übungen arbeitet und diese überprüft.
Ja, Sie können Prüfungen von allen großen Anbietern wie Microsoft, Cisco usw. bequem von zu Hause oder vom Büro aus ablegen.
Mit Readynez können Sie jeden Kurs bequem von zu Hause oder vom Büro aus absolvieren. Readynez bietet Unterstützung und bewährte Verfahren für Ihr Klassenzimmer zu Hause und Sie können das Lernen mit minimalen Auswirkungen auf Ihr tägliches Leben genießen. Außerdem sparen Sie sich die Kosten und die Umweltbelastung durch Reisen.
Tja, Lernen ist grenzenlos, wenn man motiviert ist, aber man braucht den richtigen Weg, um zu erreichen, was man will. Readynez Berater haben viele Jahre Erfahrung in der Gestaltung von Lernpfaden, und wir können auch einen für Sie entwerfen. Wir stehen Ihnen jederzeit mit Rat und Tat zur Seite. Sie können uns im Chat erreichen oder schreiben Sie uns an info@readynez.com.